Snmp V2: Trap Destination Settings; Fig. 35: Web - Snmp V2: Community Configuration Screen; Fig. 36: Web - Snmp V2: Trap Destinations Screen - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
SNMPv2: Edit SNMP Community Settings
Click Change
community strings or add a new community string.
Index: Display the index reference number for this entry. This value is required when
using the CLI interface to modify SNMP Community settings.
Community Name: Enter or modify the SNMP community name for this entry.
To delete a community string, clear the field (blank) and click
Access: Access permissions for external SNMP client using this entry.
None: Deny read and write for this entry.
Read: Grant only read access for this entry.
Write: Grant only write access for this entry.
Read&Write: Grant read and write access for this entry.
Change Community: Click to accept changes and close this dialog.

SNMP v2: Trap Destination Settings

This section of the SNMP Configuration screen is modified when SNMP v2 is enabled.
This section displays the SNMP trap destination settings. SNMP trap messages inform
network management devices of status changes on the RDL-3000.
IP Address (IPv4): IP address of this trap listener. A copy of each SNMP trap message
is transmitted to this address.
Port: Destination port address of this trap listener.
Community String: Community string associated with this trap listener.
Change: Click to modify (or delete) the existing SNMP community string.
Add: Click to create a new SNMP community string (max. 8 strings).
70-00158-03-00
USER MANUAL
or Add in the SNMP Communities section of the screen to modify existing

Fig. 35: Web - SNMP v2: Community Configuration Screen

Fig. 36: Web - SNMP v2: Trap Destinations Screen

Proprietary Redline Communications © 2015
Change Community
Page 69 of 254
.
April 17, 2015