RDL-3000 FAMILY
9.5
Configuration Screens
9.5.1
System Settings
Click System Configuration ->
screen. Use the System Settings screen to view and modify the system identification and
network interface settings.
System Information
System Name: Operator assigned name identifying this unit.
System Details: Additional operator-entered details describing this unit.
System Location: Information about the location of this unit.
Contact: Operator-entered contact information for this unit.
Network
DHCP Enable: Use this selection to enable or disable using DHCP. If DHCP is enabled,
the following fields are hidden.
IP Address: The active network IP address for this unit. The network IP address mask
may be assigned manually or by a DHCP server (see Configuration->System).
Subnet Mask: The active network address mask for this unit. The network address
mask may be assigned manually or by a DHCP server (see Configuration->System).
IP Gateway Address: The active default router/gateway for this unit.
DNS Server 1: IP address of primary DNS server.
DNS Server 2: IP address of secondary DNS server.
Syslog Settings
Enable Syslog: Check this box
Server IP: Network address of the Syslog server.
70-00158-03-00
USER MANUAL
System Settings
Fig. 79: Connect Gateway - System Information Screen
to enable saving event messages on a remote server.
Proprietary Redline Communications © 2015
in the main menu to display this
Page
238
of 254
April 17, 2015