Serial Port Settings; Data [1,2] Port Settings; Fig. 83: Connect Gateway - Serial Port Settings Screen - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
9.5.5

Serial Port Settings

Click Gateway Configuration ->
screen. Use the Serial Port Settings screen to view and modify the serial port mode of
operation and operating parameters.

DATA [1,2] Port Settings

Alias: Operator assigned name identifying this port.
Port Type: Select the mode of operation for this port.
Loopback : Port is configured for loopback test mode.
RS-232 : Port is configured for RS-232 standard (DCE).
RS-422 : Port is configured for RS-422 standard.
RS-485-2W : Port is configured for RS-485 2-wire standard.
485-4W :Port is configured for RS-485 4-wire standard.
Bitrate: Select the baud rate for this port (75-115200).
Parity: Select the parity operation in a frame (None, Odd, Even).
Databits: Select the number of data bits in a frame (5-8).
Stopbits: Select the number of stop bits in a frame (1-2).
Note: Console port is not configurable: 38400 bps 8N1 (DTE).
70-00158-03-00
USER MANUAL
Serial Port Settings

Fig. 83: Connect Gateway - Serial Port Settings Screen

Proprietary Redline Communications © 2015
in the main menu to display this
Page 243 of 254 April 17, 2015