System Status; Controls; Wireless System; Fig. 20: Web - Sector Controller System Status Screen - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
3.4.2

System Status

Click System Status in the main menu to view information about the wireless interface
and Ethernet port.

Controls

Stop Refresh: Click to stop the automatic (one second) updates to the statistics and GPS
information on this screen.
Reset Statistics: Click to reset all statistics on this screen.

Wireless System

Current Tx Power: Transmit output power level.
Note: When ATPC is enabled on the sector controller, subscribers may display a Tx
Power setting different from that set in the
Channel Frequency: RF channel (center frequency) in-use.
Selected Antenna Beam: (RAS-Elite only) Current beam setting of the RAS-Elite
antenna. The antenna will be in one of the following state:
N/A:
Auto:
Searching: Channel scan is in progress.
1-n:
Note: The RAS-Elite fields are updated only when the hardware is present and
enabled by the installed options key
70-00158-03-00
USER MANUAL

Fig. 20: Web - Sector Controller System Status Screen

RAS-Elite antenna is not connected or hardware is not installed.
Automatically search all sectors during a frequency scan.
Antenna is set for the specified sector. The center of sector '1' is marked
on the antenna. The remaining sectors are arranged sequentially
counter-clockwise around the antenna.
Proprietary Redline Communications © 2015
System Configuration
( ).
Page 46
screen.
of 254 April 17, 2015