Status Screens; General Information; System; Fig. 19: Web - General Information Screen - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
3.4

Status Screens

3.4.1

General Information

The General Information screen displays system and the Ethernet interface details.

System

System Name: Operator assigned name identifying this unit.
System Details: Additional operator-entered details describing this unit.
System Location: Information about the location of this unit.
Contact: Operator-entered contact information for this unit.
System S/N: Serial number of this unit. Also identifies the unit type.
Radio Type: Type of radio installed.
Radio Type
T072x
T212x
T202x
T352x
T502x
* Range is restricted by regional regulations (options key).
System Mode: The system modes are enabled by the active options key.
The operator MUST reboot the RDL-3000 after making changes to this parameter.
PMP SC: This unit is configured as a sector controller. The unit automatically begins
transmitting poll messages to locate and register remote subscribers.
PMP SS: This unit is configured to operate as a subscriber. The unit monitors the
selected RF channel(s) for poll messages from a sector controller.
SC ID: (SC only) Unique identification number of this sector controller.
Software Version: Firmware version in use.
70-00158-03-00
USER MANUAL

Fig. 19: Web - General Information Screen

Frequency Range (MHz)*
470 -
2100 - 2300
2300 - 2800
3300 - 3800
4940 - 5875
Proprietary Redline Communications © 2015
698
Page 44 of 254 April 17, 2015