Disable; Enable; Freq - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
ecc_cert.ecc
ecc_keypair.ecc
ecc_keypairT.ecc
The <mac> portion is the MAC address of the wireless system.
For example: dsa_key_00-09-02-00-01-02.pem
mode <usr | factory>
Specify the type of information to display.
usr User entered files (default if type is not specified).
factory - Factory default files (requires hardware jumper selection).
fips - Not available in this software version.
folder <usr | factory>
Remove all files from the specified table.
usr - User entered files (default).
fips - Not available in this software version.
id <id>
Remove a Service Group, Service, or Link table entry.
id

disable

Use the disable command to disable a Service or Link (not applicable to Service
Groups).
disable <id>
Disable a specific ID.
id Unique number for Service or Link.

enable

Use the enable command to enable a Service Group, Service, or Link).
enable <id>
Enable a specific ID.
id Unique number for Service Group, Service, or Link.

freq

Use the freq command to configure frequency ranges when using autoscan or DFS.
freq <add> <clearall> <del> <print> <reload>
add <begin> <end>
Add a frequency range (up to 32 ranges).
begin - start frequency (MHz)
end - end frequency (MHz)
clearall
Delete all entries from the frequency list.
del <idx>
Delete a frequency validation range
idx - Frequency validation range index. Use 'print' to display IDs.
exit
Exit from the current mode (also CTRL-Z).
print
list of frequency ranges.
70-00158-03-00
USER MANUAL
ECDSA certificate from SA authority.
ECDSA public and private keys from SA authority.
ECDSA locally generated public and private key.
Unique number for Service Group, Service, or Link.
Proprietary Redline Communications © 2015 Page 119 of 254 April 17, 2015