Dashboard Display; General Information; Table 8: Web - Wireless Led Indications; Fig. 18: Web - Dashboard Display - Redline RDL-3000 Series User Manual

Universal wireless transport
Hide thumbs Also See for RDL-3000 Series:
Table of Contents

Advertisement

RDL-3000 FAMILY
3.3

Dashboard Display

General Information

The dashboard is displayed at the top of all Web screens.
Title Bar
System Name: Operator entered name for this RDL-3000 device.
IP Address: IP address of this unit.
Wireless Frequency: RF frequency in-use by this unit.
Date/Time: Local time obtained from the Web browser (not the RDL-3000 clock time).
System Information
Test time: Visible only when the
at any time to cancel the timer and permanently save the running configuration. The last
saved configuration is restored when the counter reaches zero (unit is not rebooted).
Unsaved Data: Indicates if the configuration has been modified.
No: There are no differences between the running and saved configurations.
Saving: The system is saving the runtime parameters to non-volatile RAM.
Yes: There are unsaved changes to the configuration. Click
to permanently save the current running configuration. Unsaved settings are discarded
when the system is power-cycled or rebooted.
Radio Temperature: Internal temperature of the radio. The normal internal operating
temperature is between -35° C and 70° C.
Software Version: Version of the active software.
Active Links: Number of active wireless links to subscribers.
Wireless LEDs
The Wireless LED indicators indicate the status of the wireless link.
LED
Adaptive Mod.
Link
Signal
70-00158-03-00
USER MANUAL

Fig. 18: Web - Dashboard Display

Test

Table 8: Web - Wireless LED Indications

Function
N/A
Not implemented in the current software release.
Off:
Wireless link has not been established.
Enabled
remote end may be powered off.
On:
Current modulation/coding meets or exceeds the minimum
required UBR.
Off:
Wireless link has not been established. The remote end may
Disabled
be powered off or the link can not be established at the
required modulation/coding.
On:
Wireless link has been established at the modulation/coding
required for the requested UBR.
Proprietary Redline Communications © 2015
function is active. Click
Page
Save All
in the main menu
Save All
in the main menu
42
of 254
April 17, 2015

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents