RDL-3000 FAMILY
Ethernet Connection
Use the following steps to establish a Web session with the serial gateway. This method
may also be used to establish a Telnet session.
Configure the IP address of the test PC to be on the same subnet as the wireless
1.
terminal. For example, set the test PC address as follows:
TCP/IP address =
Net Mask =
Open a browser and enter the unit wireless terminal IP address in the browser
2.
address bar. The default address and credentials are:
IP Address: 192.168.25.12
User Name: admin
Password:
The Web browser features a configurable session timeout (CLI only). When the system
detects no user activity for the duration of the timeout period, the user will automatically
be logged off the system. The following screen will be displayed.
IMPORTANT: This feature does not preserve any information from the current session.
Unsaved data is discarded when the timeout interval is reached.
Serial Connection
Use the following steps to establish a serial port Telnet session with the serial gateway.
On the PC, configure access to the serial port. The factory default settings for the
1.
Connect-IWS/OWS is: 38400 bps 8N1
Login to the serial gateway using the assigned username and password. The default
2.
username and password are as follows:
username: admin
password: admin
70-00158-03-00
USER MANUAL
192.168.25.5
255.255.255.0
admin
Fig. 74: Connect Gateway - Login Screen
Fig. 75: Connect Gateway - Relogin Screen
Proprietary Redline Communications © 2015
Page
234
of 254
April 17, 2015