Chgver; Clear; Del - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
Add a new static entry in the RDL-3000 ARP table. Use 'save config' to save these
entries permanently. A maximum of two static entries can be added to the
table.
Host
MAC
del <Host>
Delete a static or dynamic entry from the ARP table. Also refer to command 'clear
arptable'.
Host:
print
ARP table. The * indicates manually entered values.
192.168.25.12# arp print
Persistent MACs:

chgver

Use the chgver command to change the firmware version loaded when the RDL-3000 is
rebooted.
chgver (no options)
Switch to the binary saved in the alternate version of firmware.
IMPORTANT: This command works silently (no operator confirmation) and the RDL-
3000 reboots immediately. Use 'get swver' to list the active and alternate versions of
firmware.

clear

Use the clear command to delete all entries in a table.
clear <arptable> <freqlist> <idtable> <log>
arptable
Delete all static entries in the ARP table (refer to arp).
freqlist
Delete all frequency ranges from list (refer to freq).
idtable
Delete all IDs from the idtable.
log
Delete all messages from the log.

del

Use the del command to delete a specific ID or security key/certificate.
del <file> <folder> <id>
file <name> <mode>
Remove a file from runtime memory and non volatile RAM.
name <filename>
File name must be of the following format:
dsa_key_<mac>.pem DSA key used for SSH.
rsa_key_<mac>.pem RSA Key used for SSH.
ssl_cert_<mac>.pem SSL Certificate.
ssl_key_<mac>.pem SSL Key.
70-00158-03-00
USER MANUAL
Host IP address. Must be same subnet as RDL-3000 unit.
Host MAC address (e.g., 01-02-03-04-05-06)
Host IP address of ARP entry to be deleted
For example:
192.168.25.1 at 00:05:5d:e0:5b:10
192.168.25.22 at 11:22:33:44:55:66 *
192.168.25.22 at 11:22:33:44:55:66
192.168.25.33 at 01:02:03:04:05:06
Proprietary Redline Communications © 2015 Page 118 of 254 April 17, 2015