Status Screen; General Information; System Information; Network Settings - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
9.4

Status Screen

9.4.1

General Information

Click System Status ->
Use the General Information screen to view details about the system operation and
interface settings.

System Information

System Name: Operator assigned name identifying this unit.
System Details: Additional operator-entered details describing this unit.
System Location: Information about the location of this unit.
Contact: Operator-entered contact information for this unit.
Software Version: Firmware version in use.
System Up Time: Time since the last system reboot/powered-cycle
(days:hours:minutes.seconds).

Network Settings

IP Address: The active network IP address for this unit. The network IP address mask
may be assigned manually or by a DHCP server (see Configuration->System).
MAC Address: MAC address of the serial gateway system.
Netmask: The active network address mask for this unit. The network address mask
may be assigned manually or by a DHCP server (see Configuration->System).
Default Gateway: The active default router/gateway for this unit.
DNS Server 1: IP address of primary DNS server.
DNS Server 2: IP address of secondary DNS server.
70-00158-03-00
USER MANUAL
General Information

Fig. 77: Connect Gateway - System Information Screen

Proprietary Redline Communications © 2015
in the main menu to display this screen.
Page 236 of 254 April 17, 2015