Page 2
All rights reserved April 30, 2013. The information in this document is proprietary to Redline Communications Inc. This document may not in whole or in part be copied, reproduced, or reduced to any medium without prior consent in writing from Redline Communications Incorporated.
This is afterwards referred to as the 'final product'. The final product may be designed and manufactured by Redline or a licensed third party. Frequency settings within the specified frequency ranges are software keyed to be compliant with specific regulatory agency requirements in the region of deployment.
Any operation or use of these modules in any manner not expressly specified within this manual or approved in writing by Redline (or its agents) is expressly forbidden and voids the users right to operate the module. This includes, but is not limited to, any modification of the module hardware or software, installation of the module in a non approved enclosure, and use with non approved antennas.
3.1 Installation Into a Final Product The RDL-3000-RMC/E/F modules must be installed only by trained professional technicians authorized by Redline or its agents. The module must be installed only into an approved enclosure (see Conditions of Use) and only at an approved manufacturing facility or service depot.
4.1.1 RDL-3000-RMC Frequency Bands Operation of the final product requires a software 'key' that is available exclusively from Redline. This key restricts device operation to the FCC/IC 4940-4990 MHz, 5250-5350 MHz, 5470-5725 MHz, or 5725-5850 MHz band. The professional installer and operator can not modify or otherwise circumvent these operational restrictions.
4.2.1 RDL-3000-RME Frequency Bands Operation of the final product (containing the RDL-3000-RME module) requires a software 'key' that is available exclusively from Redline. This key restricts device operation to the IC 2305-2320 MHz and 2345-2360 MHz bands and is subject to licensing.
Operation of the final product (containing the RDL-3000-RMF module) requires a software 'key' that is available exclusively from Redline. This key restricts device operation to the FCC 473 - 695 MHz band on TV channels 14 - 35 and 39 - 51. The professional installer and operator can not modify or otherwise circumvent these operational restrictions.
Redline sales order processing is also trained to verify that regional codes are consistent with the intended deployment location as documented in the sales order.