Fig. 21: Web - Subscriber System Status Screen - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
Current CIR Subscription Ratio: (SC only) Calculated aggregate committed bandwidth
for the sector. This statistic provides an indication if the bandwidth has been over-
subscribed. The value is calculated by comparing available bandwidth to committed
bandwidth for all links in the sector.
0-100%: Current scheduling commitments can be achieved under the present
>100%: unit is oversubscribed (aggregate CIR exceeds available bandwidth).
Wireless Security: Status of the wireless security selection.
Off - No wireless security.
On - Data sent over the wireless interface is encrypted.
DFS: Status of the DFS function.
Off: The DFS function is disabled.
On: DFS function is activated. See
DFS Action: The avoidance action to be taken when radar signals are detected. All DFS
actions are recorded in the event log.
None: The DFS feature is disabled.
Tx Off: Radio transmitter is disabled for 30 minutes.
Chg Freq: Radio transmitter is changed to a different RF frequency.
Status Code: Code indicating the status of the RDL-3000 system. Code '0000 0000'
indicates normal operation. Refer to the troubleshooting section of this manual.
70-00158-03-00
USER MANUAL
operating conditions (e.g., surplus bandwidth is available).

Fig. 21: Web - Subscriber System Status Screen

Proprietary Redline Communications © 2015
below.
DFS Action
Page 47 of 254 April 17, 2015