Snmpcommunity - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
show <config> <conns><files> <gps> <groups> <idtable> <links> <log> <snmp>
<service> <stats> <topology>
config [<id>]
Display system configuration information. When no parameters are entered, the
general configuration settings are displayed. For example: System Information,
Ethernet Configuration, Wireless Configuration, and WSDB (if enabled).
conns <id>
Display the services associated with a Link or Group. This command is provided to
support script migration from AN-80i systems.
For example:
192.168.25.2(show)# conns 4
160 Data A Conn
161 Voice A Conn
files <run | usr>
Display the key and certificate files.
gps
Display information about the GPS. If the GPS is synchronized, this command
returns the coordinates of the RDL-3000 system and the number of visible
satellites. Admin access only.
Note: Status code 0001 indicates the GPS antenna is shorted.
groups
Display information for all Service Groups.
192.168.25.2(show)# groups
128 Voice Group
129 Data Group
idtable
Display information for all system IDs.
links
Display information for all Links.
log
Display the system events log.
service <id>
Display the services associated with the specified Link or Group.
snmp
Display the SNMP configuration.
stats
Display available statistics.

snmpcommunity

Use the snmpcommunity command to configure SNMP community permissions.
snmpcommunity <add> <clearall> <default> <del> <print>
add <name> <rights>
Add a new SNMP community to the SNMP community table. The index value is
assigned automatically. Up to eight community names can be entered.
70-00158-03-00
<id> If a link ID is specified, the properties of that group are displayed.
id ID of Link or Group.
run - Display keys currently in use.
usr - Display the user keys and certificates (default).
Proprietary Redline Communications © 2015
USER MANUAL
Page 141 of 254 April 17, 2015