Wireless; Wireless Packets - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY
exchanged between the sector controller and the subscriber. For example, the signal is
marginal, or encryption is enabled but the keys do not match.
Off: Data can not be exchanged between the sector controller and the subscriber.
On: Data can be exchanged between the sector controller and the subscriber.

Wireless

The following statistics are displayed for the downlink and uplink.
Burst Rate [Mb/s]: The current uplink and downlink uncoded burst rate for the link.
Downlink: Current downlink burst rate.
Uplink: Current uplink burst rate.
A letter is displayed adjacent to the uplink and downlink burst rates indicating the RF
scheme in-use: A=MIMO-A, B=MIMO-B.
For example, 108 Mb/s
RSSI RF1: Received signal strength indicator for RF port 1.
Downlink: Reported by the remote end unit.
Uplink: Measured by this unit.
RSSI RF2: Received signal strength indicator for RF port 2.
Downlink: Reported by the remote end unit.
Uplink: Measured by this unit.
SINADR RF1: Ratio of the average RF signal strength to interference, noise, and distortion
for RF port 1.
Downlink: Reported by the remote end unit.
Uplink: Measured by this unit.
SINADR RF2: Ratio of the average RF signal strength to interference, noise, and distortion
for RF port 2.
Downlink: Reported by the remote end unit.
Uplink: Measured by this unit.
Lost Frames: Number of frames lost.
PIR: Operator-assigned Peak Information Rate (PIR) for this wireless link. Refer to
Subscriber Link
Downlink: Operator-assigned downlink PIR for this link.
Uplink: Operator-assigned uplink PIR for this link.

Wireless Packets

Summary of wireless packet activity on the downlink and uplink.
Total: Total number of packets processed over the wireless interface. Total does not include
discarded and errored packets.
Retransmitted: Total number of wireless packets retransmitted over the wireless interface.
Lost: Total number of wireless packets discarded by this unit due to errors.
Controls
Refresh: Click to update displayed statistics counters.
Reset: Click to reset displayed statistics counters.
70-00158-03-00
USER MANUAL
B
indicates 108 Megabits per second using MIMO-B.
Configuration.
Proprietary Redline Communications © 2015 Page 54 of 254 April 17, 2015