Wsdb Configuration/Control; Fig. 46: Web - Wsdb Configuration/Control Screen - Redline RDL-3000 Series User Manual

RDL-3000 FAMILY USER MANUAL
3.5.5

WSDB Configuration/Control

Configuration->WSDB Control
Click to display the WSDB (TV Whitespaces Database)
configuration and control screen. This screen is displayed only if FCC WSDB support is
enabled by the options key ( ) (US only).
Web -
Fig. 46: WSDB Configuration/Control Screen
To operate in the TV Whitespaces frequency range, each RDL-3000 sector controller
and subscriber must be able to contact and register with the WSDB database server.
The server URL is programmed into the RDL-3000, but a DNS server IP address must
be provided (see Configuration-> System).
To register, the operator must complete the contact and location information on this
form. All information on this screen is required for registration with the WSDB server.
The registration process will fail if the form is submitted with any blank/empty field. The
form contents are transmitted to the server each time the operator clicks Apply or Apply
& Save. The status of the registration is displayed on the WSDB status page (Status-
>WSDB Status). The RDL-3000 system is not allowed to transmit on any channels
before registering with the WSDB database and obtaining a list of available channels or
after the expiry time has elapsed.
70-00158-03-00 Proprietary Redline Communications © 2015 Page 83 of 254 April 17, 2015