Current Setting - R&S NGL200 series User Manual

®
R&S NGL200
[SOURce:]VOLTage[:LEVel][:IMMediate]:STEP[:INCRement] <stepsize>
[SOURce:]VOLTage[:LEVel][:IMMediate]:STEP[:INCRement]? [<stepsize>]
Sets/Queries the incremental step size for the
Setting parameters:
<stepsize>
Query parameters:
<stepsize>
Example:

7.5.3 Current Setting

The SOURce:CURRent subsystem contains the commands for setting the current limit
of the output channels. The default unit is A.
User Manual 1178.8736.02 ─ 02.01
numeric | DEFault
numeric
Step value in V.
DEFault
Default value of stepsize.
Range: 0.001 to 5.000
Increment: 0.001
*RST: 0.100
Default unit: V
DEFault
Queries the default voltage step size.
INST OUT1
VOLT:STEP 0.001
VOLT:STEP DEF
VOLT:STEP? DEF -> 0.10
Returns the default stepsize voltage.
See also Example "Configuring the output voltage"
Remote Control Commands
Configuration Commands
VOLT UP | VOLT DOWN
command.
on page 88.
91