R&S NGL200 series User Manual page 61

®
R&S NGL200
Figure 6-20: Digital Out dialog
7. Depending on your requirement, select the digital output accordingly.
See
8. Select the respective "Digital Output" menu items and set "On" to enable the trig-
ger-out parameters.
9. Select "Back"
10. If "User Button" is set as a trigger-in signal, select "User Button" menu item.
The R&S NGL200 displays the "User Button" dialog.
See also
11. Select "User Button Action" and set as "Trigger".
The R&S NGL200 generates a trigger-in signal when
12. If "Logging" is set as a trigger-out signal, select "Logging" menu item.
The R&S NGL200 displays the "Logging" dialog.
See also
13. Select "Triggered" and set as "On".
The R&S NGL200 starts the data logging of the instrument when a trigger is detec-
ted.
14. If "Arbitrary" is set as a trigger-out signal, select "Arbitrary" menu item from the
respective channel menu.
The R&S NGL200 displays the "Arbitrary" dialog.
See also
15. Depending on your requirement, select "Start triggered" or "Step triggered" menu
item and set "On".
The R&S NGL200 starts or steps through the arbitrary signal when a trigger is
detected.
User Manual 1178.8736.02 ─ 02.01
Table 6-2 for details of the trigger-out parameters.
to go back to "Device" menu.
Chapter 6.5, "User Button
Chapter 6.7, "Data
Chapter 6.4.1, "Arbitrary",
Key", on page 59.
Logger", on page 61.
on page 49.
Instrument Functions
Advanced Features
user button key is pressed.
58