Store And Recall - R&S NGL200 series User Manual

®
R&S NGL200
Table 6-5: File manager action
Action

6.9 Store and Recall

Upon power-up, the instrument loads the last stored settings from internal memory
location. Auto saved parameters are also applied during startup.
The R&S NGL200 output states of all channels (Ch1, Ch2) are disabled when the
recall function is activated.
Auto saved instrument settings
Auto saved of instrument settings are applied when any of the following parameters
are changed:
●
Chapter 6.11, "General Instrument
●
USB connection mode
●
Ethernet settings
Inaddition of the auto saved instrument settings, the following instrument settings are
stored or recalled in the internal memory:
●
Set voltage and current level
●
Settings in the Protection
●
Arbitrary andRamp settings
●
User button key function
●
Data Logging settings
●
GPIB Address
1. Press [Settings] key.
The R&S NGL200 displays the main menu window.
2. Select the "Device" tab to configure file settings for store and recall function.
The R&S NGL200 displays the device menu.
3. Select "Save/Recall Device Settings".
The R&S NGL200 loads the "Save/Recall Device Settings" dialog.
User Manual 1178.8736.02 ─ 02.01
Description
Copy from internal memory to USB.
Copy from USB to internal memory.
Delete the selected file.
Settings", on page 73
Function, Safety Limits
Instrument Functions
Store and Recall
65