®
R&S
NGL200
Figure A-2: Decimal representation of a bit pattern
Error Queue
Each error state in the instrument leads to an entry in the error queue. The entries of
the error queue are detailed plain text error messages. You can look them up in the
error log or via remote control using SYSTem:ERRor[:NEXT]?. Each call of
SYSTem:ERRor[:NEXT]? provides one entry from the error queue. If no error mes-
sages are stored, the instrument responds with 0, "No error".
User Manual 1178.8736.02 ─ 02.01
Additional Basics on Remote Control
Status Reporting System
142