®
R&S
NGL200
Query parameters:
<current>
See also
7.5.4 Resistance Setting
The SOURce:RESistance subsystem contains the commands for setting the resist-
ance limit of the output channels. The default unit is ohms.
User Manual 1178.8736.02 ─ 02.01
DOWN
Decrease current by a defined step size. See
]CURRent[:LEVel][:IMMediate]:STEP[:INCRement]
on page 94.
MIN | MAX
MIN
Return minimum current.
MAX
Return maximum current.
Example "Configuring the current limit"
Remote Control Commands
Configuration Commands
[SOURce:
on page 92.
95