R&S NGL200 series User Manual page 55

®
R&S NGL200
The R&S NGL200 opens the arbitrary editor dialog to edit the arbitrary file.
Figure 6-14: Arbitrary editor dialog
7. Configure the "Arb Editor" with the required voltage, current and duration.
The R&S NGL200 displays the on-screen keypad for data entry.
8. Confirm values with the unit keys.
9. Select the interpolation checklist to toggle on/off the interpolation function on the
arbitrary data.
10. Select the "Plus" or "Minus" icon to add or delete the arbitrary data from the dialog.
●
●
11. Set the "Rep" to configure repetition cycle for the arbitrary data.
By default, the repetition cycle is set to infinity.
12. Set the "End Behavior" to handle the way to end the automation of the arbitrary
function.
●
●
13. Select "Save" (New file) or "Save as" (Existing file) to save the arbitrary data.
The R&S NGL200 displays a popup message to shows that file saved successfully.
User Manual 1178.8736.02 ─ 02.01
"+": A new row of arbitrary data is added to the end of the table. The new addi-
tion is a copy of the last arbitrary data in the table.
"-": To delete, select the row of arbitrary data for deletion follows by the "Minus"
icon.
"Off": The output of the selected channel is turned off after performing the arbi-
trary function.
"Hold": The last voltage and current values remains at the output terminal of
the instrument.
Instrument Functions
Advanced Features
52