®
R&S
NGL200
Setting parameters:
<Month>
<Day>
<Hour>
<Minute>
<Second>
Example:
LOG:TRIGgered <state>
LOG:TRIGgered?
Sets/Queries the manual trigger for the data logging function.
Parameters:
<state>
Example:
7.10 Status Reporting
7.10.1 STATus:OPERation Registers
The commands of the STATus:OPERation subsystem control the status reporting
structures of the STATus:OPERation register.
The suffix at <Channel> selects the instrument. The range is <1...2>.
See also:
●
Chapter A.3.1, "Structure of a SCPI Status
●
STATus:OPERation Register
STATus:OPERation:INSTrument:CONDition?
STATus:OPERation:INSTrument:ISUMmary<Channel>:CONDition?
STATus:OPERation:INSTrument:ENABle
STATus:OPERation:INSTrument:ISUMmary<Channel>:ENABle
STATus:OPERation:INSTrument[:EVENt]?
STATus:OPERation:INSTrument:ISUMmary<Channel>[:EVENt]?
STATus:OPERation:INSTrument:NTRansition
User Manual 1178.8736.02 ─ 02.01
Sets the month for the data logging function.
Sets the day for the data logging function.
Sets the hour for the data logging function.
Sets the minute for the data logging function.
Sets the second for the data logging function.
LOG:STIM 2018,08,18,08,18,18
LOG:STIM? -> 2018,08,18,08,18,18
OFF | ON | 0 | 1
OFF | 0
Manual trigger function will be deactivated.
ON | 1
Manual trigger function will be activated.
LOG:TRIG ON
LOG:TRIG? -> 1
....................................................................128
..........................................................................128
........................................................................128
................................................................... 129
Remote Control Commands
Status Reporting
Register",
on page 138
....................................128
..........................................128
........................................128
127