Rear Panel - R&S NGL200 series User Manual

®
R&S NGL200
Each channel is capable to source 0 V to 6 V with a current of 6 A or 6 V to 20 V with a
current of 3 A. In sink mode, each channel can consume 0 A to 3 A at an input voltage
of 0 V to 20 V.
Output terminals (5)
Both instrument models are equipped with 4 terminals. The R&S NGL201 provides
both the output plus the sense connectors at the front panel while the R&S NGL202
provides only output terminals for both channels.
USB connector (6)
The USB connector is a Type-A connector. You can connect a USB flash drive to this
connector to perform a firmware update, store logging data or screen shots.
Power key (7)
The [Power] key switches the instrument on and off.
4.2.1.2

Rear Panel

Figure 4-3
Figure 4-3: Rear panel of R&S NGL200
8 = AC inlet with fuse holder and voltage selector
9 = Channel 1 rear panel connector
10 = Channel 2 rear panel connector (NGL202 model)
11 = USB connector (Device)
12 = USB connector (Host)
13 = Ethernet (LAN) connector
14 = Cover for optional IEEE 488 (GPIB) Interface
15 = Digital I/O connector
User Manual 1178.8736.02 ─ 02.01
shows the rear panel of the R&S NGL200 with its connectors.
Getting Started
Instrument Tour
21