Network Connection; Lan Connection - R&S NGL200 series User Manual

®
R&S NGL200

6.10.1 Network Connection

There are two methods to establish a local area network (LAN) connection with the
R&S NGL200 for remote control operation.
●
LAN
●
Wireless LAN
1. Select "Network" from the
The R&S NGL200 displays the "Network" dialog.
Figure 6-29: Network dialog
2. Set the required "SCPI Raw Port" and "Hostname".
The R&S NGL200 displays the on-screen keypad to enter the port number and
hostname.
●
●
When the connection is alive, the network icon is highlighted in white on the device sta-
tus bar information.
6.10.1.1

LAN Connection

The R&S NGL200 is equipped with a network interface and can be connected to an
Ethernet LAN (local area network). A LAN connection is necessary for remote control
of the instrument, and for access from a computer using a web browser.
Risk of network failure
Before connecting the instrument to the network or configuring the network, consult
your network administrator. Errors may affect the entire network.
User Manual 1178.8736.02 ─ 02.01
"SCPI Raw Port": A port number used to open a raw TCP/IP connection to
send raw SCPI commands to the instrument
"Hostname": The name assigned to the instrument used to identify it in the net-
work
Figure 6-28.
Instrument Functions
Interfaces
68