Log:interval; Log:mode; Log:stime - R&S NGL200 series User Manual

®
R&S NGL200
LOG:INTerval <interval>
LOG:INTerval? [<interval>]
Sets/Queries the data logging measurement interval. The measurement interval
describes the time between the recorded measurements..
Setting parameters:
<interval>
Query parameters:
<interval>
Example:
LOG:MODE <mode>

LOG:MODE?

Sets/Queries the data logging mode.
Parameters:
<mode>
Example:
LOG:STIMe <Year>, <Month>, <Day>, <Hour>, <Minute>, <Second>

LOG:STIMe?

Sets/Queries the start time of the data logging fucntion.
Parameters:
<Year>
User Manual 1178.8736.02 ─ 02.01
numeric_value | MIN | MAX
numeric_value
Measurement interval in the range of 0.1 s to 600 s.
MIN
Minimum measurement interval is set at 0.1 s.
MAX
Maximum measurement interval is set at 600 s.
Default unit: s
MIN | MAX
Return the measurement interval.
LOG:INT 10
LOG:INT? -> 10
UNLimited | COUNt | DURation | SPAN
UNLimited
Infinite data capture.
COUNt
Number of measurement values to be captured.
DURation
Duration of the measurement values capture.
SPAN
Interval of the measurement values capture.
LOG:MODE DUR
LOG:MODE? -> DUR
Sets the year for the data logging function.
Remote Control Commands
Data and File Management Commands
126