Limits - R&S NGL200 series User Manual

®
R&S NGL200
circuiting the fuse holder is prohibited. Resulting damages are not covered by the war-
ranty.
Safe operation
If the instrument is to remain unattended for a longer time period, it must be switched
off at the mains switch for safety reasons.

3.5 Limits

The R&S NGL200 is equipped with a protective overload feature. The protective over-
load feature prevents damage to the instrument and is intended to protect against a
possible electrical shock. The maximum values for the instrument must not be excee-
ded. The protection limits are listed on the front panel of the R&S NGL200 to ensure
the safe operation of the instrument.
These protection limits must be adhered to:
Specification
Maximum output voltage
Maximum output current
Maximum voltage against earth
MAximum counter-voltage (same polarity)
Maximum reverse voltage (opposite polarity)
Maximum reverse current sink current
Power supply
Frequency
Maximum power output
User Manual 1178.8736.02 ─ 02.01
Limits
20 VDC
6 A (<= 6 V)
3 A (> 6 V)
250 V peak
22 V
0.5 V
3 A
100 VAC, 115 VAC or 230 VAC (tolerance ± 10%)
50 Hz/60 Hz
120 W (R&S NGL202), 60 W (R&S NGL201)
Important Notes
Limits
13