R&S NGL200 series User Manual page 120

®
R&S NGL200
Example:
ARBitrary:LOAD
Loads the stored arbitrary waveform of the previous selected channel and memory.
Usage:
ARBitrary:REPetitions <repetition_rate>
ARBitrary:REPetitions?
Sets/Queries the repetition rate of the defined arbitrary waveform for the previous
selected channel. Up to 255 repetitions are possible. If the repetition rate „0" is
selected the arbitrary waveform of the previous selected channel will be repeated infin-
itely.
Parameters:
repetition_rate
Example:
ARBitrary:SAVE
Save the current arbirary table to a file (filename specified with 'arb:fname').
Example:
Usage:
ARBitrary:TRANsfer <channel>
Transfers the defined arbitrary table to the selected channel.
Parameters:
<channel>
Example:
User Manual 1178.8736.02 ─ 02.01
DEF
Internal memory
ARB:FNAM "01.CSV"
ARB:FNAM? INT -> "01.CSV"
Event
Range: 0 to 65535
The "0" indicates infinite repetition.
INST OUT1
ARB:REP 10
ARB:REP? -> 10
The return repetition rate of the Ch1 arbitrary waveform is 10.
INST OUT1
ARB:DATA 10,1,0.5,0
ARB:REP 10
ARB:FNAM "ARB03.CSV",INT
ARB:SAVE
Save a predefined arbitrary data to a filename ARB03.CSV in
the internal memory location.
Event
1 | 2 | 3 | 4
See Example "Configuring an arbitrary sequence"
Remote Control Commands
Arbitrary Setting Commands
on page 114.
117