Display Commands - R&S NGL200 series User Manual

®
R&S NGL200
Parameters:
<hh>
<mm>
<ss>
Example:

7.3 Display Commands

The DISPlay subsystem contains the commands for display functions, which do not
affect signal generation directly.
DISPlay:BRIGhtness
DISPlay[:WINDow]:TEXT:CLEar
DISPlay[:WINDow]:TEXT[:DATA]
DISPlay:BRIGhtness <brightness>
DISPlay:BRIGhtness?
Sets/Queries the display brightness.
Parameters:
<brightness>
Example:
DISPlay[:WINDow]:TEXT:CLEar
Clears the text message box on the front display.
Usage:
DISPlay[:WINDow]:TEXT[:DATA] <string>
Displays a text message box on the front display.
Setting parameters:
<string>
Example:
Usage:
User Manual 1178.8736.02 ─ 02.01
Sets the hours of the system time.
Sets the minutes of the system time.
Sets the seconds of the system time.
SYSTem:TIME 12, 30, 59
SYSTem:TIME? -> 12, 30, 59
Returns system time.
........................................................................................................ 84
........................................................................................ 84
....................................................................................... 84
Displays brightness for the instrument.
Range: 0.0 to 1.0
Increment: 0.1
*RST: 1.0
DISPlay:BRIGhtness 0.5
DISPlay:BRIGhtness? -> 0.5
Returns the display brightness value.
Setting only
Text message for display.
DISPlay:TEXT "NGL Test"
Setting only
Remote Control Commands
Display Commands
84