®
R&S
NGL200
FUSE:DELay[:BLOWing] <delay>
FUSE:DELay[:BLOWing]?
Sets/Queries a delay time for the fuse to take effect.
Parameters:
<delay>
Example:
FUSE:LINK <arg0>
FUSE:LINK? <arg0>
Sets/Queries the fuses of several serlected channels (fuse linking).
Parameters for setting and query:
<arg0>
Example:
FUSE:TRIPped?
Queries the status if fuse has tripped in the selected channel.
Parameters:
<State>
Example:
Usage:
FUSE:UNLink <channel>
Dissolves linked fuses.
User Manual 1178.8736.02 ─ 02.01
numeric | MIN | MAX
numeric
Numeric value for the linitial fuse delay.
MIN
Min value for linitial fuse delay.
MAX
Max value for linitial fuse delay.
Range:
0.00 to 10.00
*RST:
0
Default unit: s
See
Example "Configuring fuses"
1 | 2 | 3 | 4
INST OUT1;:FUSE:LINK 2
Channel 2 is linked with channel 1
INST OUT1;:FUSE:LINK?2
Return 1 if channel 1 is linked with channel 2
See
Example "Configuring fuses"
OFF | ON | 0 | 1
ON | 1
Fuse is tripped.
OFF | 0
Fuse is not tripped.
See
Example "Configuring fuses"
Query only
Remote Control Commands
Configuration Commands
on page 102.
on page 102.
on page 102.
105