Fuse Setting - R&S NGL200 series User Manual

®
R&S NGL200
OUTPut:IMPedance:STATe <state>
OUTPut:IMPedance:STATe?
Activates/Deactivates or Queries the impedance target for the selected channel.
Parameters:
<state>
Example:
OUTPut:SELect <state>
OUTPut:SELect?
Activates/Deactivates or Queries the selected channel.
Parameters:
<state>
Example:

7.5.7 Fuse Setting

The FUSE subsystem contains the commands for activating fuses and setting fuse
parameters of the output channels.
The delay function of the fuses takes effect when the corresponding channel is activa-
ted (Output On).
Example: Configuring fuses
This example contains all commands to configure and query the fuse states and set-
tings.
// ************************************************
// Activate a fuse
// ************************************************
INST OUT1
FUSE 1
User Manual 1178.8736.02 ─ 02.01
OFF | ON | 0 | 1
OFF | 0
Deactivates output impedance for the selected channel.
ON | 1
Activates output impedance for the selected channel.
OUTPut:IMPedance 1
OUTPut:IMPedance:STAT? -> 1
Return output impedance state as on.
OFF | ON | 0 | 1
OFF | 0
Deactivates the selected channel.
ON | 1
Activates the selected channel.
*RST: OFF | 0
See Example "Activating the channels"
Remote Control Commands
Configuration Commands
on page 99
102