Ovp Setting - R&S NGL200 series User Manual

®
R&S NGL200
Parameters:
<channel>
Example:
Usage:
FUSE[:STATe] <state>
FUSE[:STATe]?
Sets/Queries the fuse function in the selected channel.
Parameters:
<state>
Example:

7.5.8 OVP Setting

The VOLTage:PROTection subsystem contains the commands for setting the over-
voltage protection parameters for the output channels. The default unit is V.
User Manual 1178.8736.02 ─ 02.01
1 | 2 | 3 | 4
See Example "Configuring fuses"
Setting only
OFF | ON | 0 | 1
ON | 1
Fuse function is activated.
OFF | 0
Fuse function is not activated.
See Example "Configuring fuses"
Remote Control Commands
Configuration Commands
on page 102.
on page 102.
106