Arbitrary Setting Commands - R&S NGL200 series User Manual
Hide thumbs
Also See for NGL200 series:
- User manual (176 pages) ,
- Getting started (30 pages) ,
- Instrument security procedures (7 pages)
Table of Contents
Advertisement
®
R&S
NGL200
Example:
MEASure[:SCALar]:POWer?
Queries the currently emitted power of the selected channel
Example:
Usage:
MEASure[:SCALar][:VOLTage][:DC]?
Queries the currently measured voltage of the selected channel.
Example:
Usage:
7.7 Arbitrary Setting Commands
The ARBitrary subsystem contains the commands for configuring an arbitrary
sequence for the output channels.
User Manual 1178.8736.02 ─ 02.01
INST OUT1
MEAS:ENER:STAT ON
MEAS:ENER:STAT?
MEAS:ENER:STAT? -> 1
Energy counter of Ch1 is enabled.
MEAS:POW? -> 3.00E+00
Query only
MEAS:VOLT? -> 1.000E+00
Query only
Remote Control Commands
Arbitrary Setting Commands
113
Advertisement
Chapters
Table of Contents
