R&S NGL200 series User Manual page 131

®
R&S NGL200
STATus:OPERation:INSTrument:ISUMmary<Channel>:NTRansition
STATus:OPERation:INSTrument:PTRansition
STATus:OPERation:INSTrument:ISUMmary<Channel>:PTRansition
STATus:OPERation:INSTrument:CONDition?
STATus:OPERation:INSTrument:ISUMmary<Channel>:CONDition? <Condition>
Returns the contents of the CONDition part of the status register to check for operation
instrument or measurement states. Reading the CONDition registers does not delete
the contents.
Suffix:
<Channel>
Return values:
<Condition>
Usage:
STATus:OPERation:INSTrument:ENABle <arg0>
STATus:OPERation:INSTrument:ISUMmary<Channel>:ENABle <arg0>
Controls/Queries the ENABle part of the STATus:OPERation register. The ENABle
defines which events in the EVENt part of the status register are forwarded to the
OPERation summary bit (bit 7) of the status byte. The status byte can be used to cre-
ate a service request.
Suffix:
<Channel>
Parameters:
<Enable>
Example:
STATus:OPERation:INSTrument[:EVENt]?
STATus:OPERation:INSTrument:ISUMmary<Channel>[:EVENt]?
Returns the contents of the EVENt part of the status register to check whether an
event has occurred since the last reading. Reading an EVENt register deletes its con-
tents.
Suffix:
<Channel>
Return values:
<Event>
Usage:
User Manual 1178.8736.02 ─ 02.01
................................................................... 129
.
1..n
Condition bits in decimal representation.
Range: 1 to 65535
Query only
.
1..n
Range: 1 to 65535
Increment: 1
STATus:OPERation:INSTrument:ISUMmary1:ENABle?
Reads the enable register for the Standard Operation Register
group
.
1..n
Range: Range: 1 to 65535
Query only
Remote Control Commands
Status Reporting
................................... 129
................................... 129
128