System Information Menu; Diagnostics Menu - Xycom XVME-678 Manual

Vmebus pc/at processor module
Hide thumbs Also See for XVME-678:
Table of Contents

Advertisement

Chapter 3 - BIOS Setup Program
3.3.5
System Infonnation Menu
The System Information Menu, depicted in Figure 3-6 below, provides the following information:
System Information - Copyright 1989-91 by Xycom, Incorporated
Processor:
Cx486SLC/e
LPT 1 Address:
0378H
Coprocessor:
Internal
LPT2 Address:
Unused
LPT3 Address:
·Unused
BIOS ID:
3171000006
BIOS Revision:
03.06.01
COM1 Address: 03F8H
COM2 Address: 02F8H
Programmable Memory: 4096K
COM3 Address: Unused
Other Memory:
OK
COM4 Address: Unused
Internal Mouse:
No
Press
<
any key> to exit.
Figure 3-6. System Information Menu
The System Information Menu states the type of processor and math co-processor used and the port
addresses. The BIOS ID and revision identify the BIOS and may vary. Programmable memory is
controlled by the BIOS. Other memory includes AT-bus memory that is annexed as system memory.
(This memory could be from a PC/104 expansion card.)
3.3.6
Diagnostics Menu
The Advanced Diagnostics Software System is a collection of utility programs that provide advanced tests
for PC/AT-compatible systems. This section contains information on using the Advanced Diagnostics
Software System on the XVME-678/688. All pertinent menu instructions are included.
The Diagnostics Menu offers the following choices: Park Fixed Disks, Diagnostics, and Format Fixed
Disk. Each of the choices from the Main Menu is explained in the following sections.
3.3.6.1
Park Fixed Disks
This menu. selection parks the fixed disk drive(s) by placing the fixed heads over the diagnostic cylinder
so vibration does not damage the usable media. This operation should be performed before transporting
the system.
3-16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XVME-678 and is the answer not in the manual?

This manual is also suitable for:

Xvme-688

Table of Contents