Xycom XVME-678 Manual page 59

3.3.4.5 Keyboard Delay (112/.3/4 quarters of a second)
XVME-678/688 Manual
July 1994
This sets the amount of time that elapses after a key is pressed before the key starts to repeat. The smaller
the time selected, the sooner the key starts to repeat.
3.3.4.6 Keyboard Rate (2/6/10/13/18/22/27/30 per second)
This option defines the rate at which the keyboard repeats while a key is pressed. The higher the number,
the faster the key repeats.
3.3.4.7 Numlock Boot State (All1a/OniOft)
This option determines how the BIOS defines the numlock key at power-up or soft reset. Normally, the
BIOS sets the numlock (numeric keys selected) if it detects a 101- or 102-key keyboard at power-up. If
an 84-key keyboard is detected, numlock is turned off (cursor keys selected). Select Auto to keep this
state; On to select the numeric keys, regardless of keyboard; or Off to select the cursor keys, regardless
of keyboard.
3-15