Epson RC620 Manual page 98

2. Installation
Software Installation
Before installing EtherNet/IP master board in your controller, you must install the
applicomIO Console application and drivers according to the type of board you are using.
88
1. Start the controller.
2. Run the following file from the install folder in the controller to start the
installation.
C:\Install\FieldBus\Install\applicomIO\Disk1\Setup.EXE
3. The following dialog box appears. Select the desired language for the installer.
4. The [Summary] dialog box appears. Select "Products Installation".
5. The [applicomIO] dialog box appears. Select "Installation"
RC620 Option Fieldbus I/O Rev.8