Download  Print this page

Epson RC620 Manual Page 8

Robot controller option, fieldbus i/o.
Hide thumbs

Advertisement

Before Reading This Manual
This section describes what you should know before reading this manual.
Safety Precautions
Installation and transportation of robots and robotic equipment shall be performed by
qualified personnel and should conform to all national and local codes.
Please carefully read this manual and other related manuals before installing the robot
system or before connecting cables.
Keep this manual handy for easy access at all times. Please read the Safety chapter in
User's Guide to understand safety requirements before installing the robot system.
Conventions
Important safety considerations are indicated throughout the manual by the following
symbols. Be sure to read the descriptions shown with each symbol.
Security support for the network connection
The network connecting function (Ethernet) on our products assumes the use in the local
network such as the factory LAN network. Do not connect to the external network such as
the Internet.
In addition, please take security measure such as the antivirus software to block the virus
from the network connection.
Security support for the USB memory
Make sure that the USB memory is not infected with virus when connecting to the
Controller.
vi
This symbol indicates that a danger of possible serious injury
or death exists if the associated instructions are not followed
WARNING
properly.
This symbol indicates that a danger of possible harm to people
caused by electric shock exists if the associated instructions are
WARNING
not followed properly.
This symbol indicates that a danger of possible harm to people
or physical damage to equipment and facilities exists if the
CAUTION
associated instructions are not followed properly.
RC620 Option Fieldbus I/O Rev.8

Advertisement

Table of Contents

   Also See for Epson RC620

   Related Manuals for Epson RC620

Comments to this Manuals

Symbols: 0
Latest comments: