Epson RC620 Manual page 102

2. Installation
92
17. The [Setup Status] dialog box appears and the installation of applicomIO Console
application starts.
18. When the installation is completed, the [Setup Complete] dialog box appears.
The message prompts you to reboot your controller. Select "Yes, I want to restart
my computer now".
19. Click <Finish> and reboot the controller.
20. Start the following file and install the service pack.
C:\Install\FieldBus\Install\Sp\Setup.EXE
No installation is necessary when a service pack is not attached to the controller.
21. After completing the installation of the service pack, shutdown the computer.
22. Refer to the next section Board Installation to install the EtherNet/IP master
board.
(18)
(19)
RC620 Option Fieldbus I/O Rev.8