Download  Print this page

Epson RC620 Manual Page 76

Robot controller option, fieldbus i/o.
Hide thumbs


2. Installation
14. When you finish adding the PROFIBUS-DP master board to the applicomIO
15. After the controller is rebooted, refer to the next section Master Mode and continue
Console application, reboot the controller.
14-1 Close the applicomIO Console application.
When closing the applicomIO Console application, the following message
box appears. Click <Yes>.
14-2 The following dialog appears. Click <OK>.
14-3 Reboot the Windows.
the step.
RC620 Option Fieldbus I/O Rev.8


Table of Contents

   Also See for Epson RC620

   Related Manuals for Epson RC620

Comments to this Manuals

Symbols: 0
Latest comments: