Epson RC620 Manual page 63

Software Installation (PCI-DPIO)
Before installing the PROFIBUS-DP master board in your controller, you must install the
applicomIO Console application and drivers according to the type of board you are using.
For PCU-D2PIO, refer to Software Installation (PCU-D2PIO).
1. Start the controller.
2. Execute the following file in the install folder of the controller and start the
3. The following dialog box appears. Select the desired language for the installer.
4. The [Summary] dialog box appears. Select "Products Installation".
5. The [applicomIO] dialog box appears. Select "Installation".
RC620 Option Fieldbus I/O Rev.8
installation.
C:\Install\FieldBus\Install\applicomIO\Disk1\Setup.EXE
2. Installation
53