4. Select [Fieldbus Slave]-[General].
5.
6.
Editing of input / output size
You can change the input/output size of the CC-Link slave board if necessary.
1.
2.
RC620 Option Fieldbus I/O Rev.8
(4)
Make sure that the following are displayed.
Fieldbus Type : CC-Link
Input Bytes
: 32 (default setting)
Output Bytes : 32 (default setting)
Click <Close>.
Select [Setup]-[System Configuration] and display the [System Configuration] dialog
box.
Select [Inputs / Outputs]-[Fieldbus Slave]-[General].
2. Installation
117