Epson RC620 Manual page 77

Master Mode
1. Ensure that the board is connected to the fieldbus.
2. Start the applicomIO Console application.
3. The [applicomIOR console] dialog box appears. Register the device information
4. Select "Protocol".
5. Select the [Equipment Library] tab.
6. Click the<Add> icon.
7. The [Seelct configuration files] dialog box appears. Specify the GSD file that is
RC620 Option Fieldbus I/O Rev.8
(GSD file) that is necessary for the network setup.
(6)
(5)
supplied from the device manufacturer. Click <Open>.
PCI-DPIO
(4)
2. Installation
67