Master Mode
1. Ensure that the board is connected to the Fieldbus.
2. Start the <applicomIO Console> application.
3. The [applicomIOR console] dialog box appears. Register the device information (EDS
4. Select [Protocol].
5. Select the [Equipment Library] tab.
6. Click the <Add> icon.
7. The [Select configuration files] dialog box appears.
RC620 Option Fieldbus I/O Rev.8
file) that is necessary for the network setup.
(6)
(5)
Specify the EDS file that is supplied by the device manufacturer. Click <Open>.
(4)
2. Installation
31