1. RFC relay
2. Relay box
ENGINE AND EMISSION CONTROL SYSTEM 6E1-31
RADIATOR FAN CONTROL RELAY (RFC RELAY)
INSPECTION
1) Disconnect negative cable at battery.
2) Remove RFC relay from relay box.
3) Structure of RFC relay is the same as that of main relay.
Check its resistance and operation using the same procedure as
that for main relay. If found defective, replace.
RADIATOR FAN
INSPECTION
1) Disconnect negative cable at battery.
2) Disconnect radiator fan motor connector (2).
3) Connect battery (1) to the motor and check for operation.
If fan fails to operate, replace.