Suzuki WagonR+ RB310 Service Manual page 1952

6C-8 ENGINE FUEL
7) Lower fuel tank a little as to disconnect wire harness at connec-
tor (1), then remove fuel tank.
INSPECTION
After removing fuel tank, check hoses and pipes connected to fuel
tank for leaks, loose connections, deterioration or damage. Also
check fuel pump assembly gaskets for leaks, visually inspect fuel
tank for leaks and damage.
Replace any damaged or malconditioned parts.
INSTALLATION
1) If parts have been removed from fuel tank, install them before
installing fuel tank to vehicle.
2) Raise fuel tank with jack and connect connector (1) of fuel pump
and gauge and clamp wire harness.
3) Install fuel tank (1) to vehicle.
Tightening Torque
.
(a): 23 N m (2.3 kg-m, 17.0 lb-ft)
4) Connect fuel filler hose (1) to fuel tank and breather hose (2) to
filler neck and clamp them securely.
For proper installation, refer to the first figure of ON-VEHICLE
SERVICE.