Volkswagen Passat 1995 Official Factory Repair Manual page 4245

Work descriptions
screw - 3 - .
- Check pitch angle.
Driver's side
Passenger's side
Rear wiper
Tolerance
1)
Windshield wiper blade with plastic spoiler (vehicles from
05.94 on)
If necessary, adjust pitch angle to specified value as
follows:
- Place open-end wrench 24 mm - 1 - onto adjustment
device and set windshield wiper arm - 2 - to specified value
- arrows - .
- Remove windshield wiper arm - 2 - from adjustment
device and secure again using mounting screw - 3 - .
- Check adjusted value according to table. If necessary,
repeat setting and checking procedure until specified value
is reached.
- Remove adjustment device and install windshield wiper
blade.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.ME01.01.5
Pitch angle (specified values) for
1)
-2.5 / -4
0
0
2
Page 15 of 83
12/7/2004