Volkswagen Passat 1995 Official Factory Repair Manual page 4281

Work descriptions
- For ATF test remove locking bolt - arrow - in oil pan.
ATF present in overflow tube - arrow 2 - runs off.
If ATF drips from hole:
ATF must not be topped off.
- Cut seal - arrow - of locking bolt with a side cutter and
remove seal.
- Install locking bolt with new seal and screw in hand-tight.
- Tighten locking bolt - arrow 1 - with new seal to 15 Nm
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.ME01.01.5
Page 51 of 83
12/7/2004