Volkswagen Passat 1995 Official Factory Repair Manual page 4287

Work descriptions
- Install new ATF-strainer with new seal. Tightening torque
for securing bolts: 8 Nm.
- Install oil pan with new seal. Make sure that spacers are
fastened. Tightening torque for securing bolts: 12 Nm.
- Next, add 3.0L ATF (replacement capacity) using a funnel.
Note:
To wipe dipstick off a lint-free cloth must be used!
n
Adding to little or too much ATF impairs functioning of
n
transmission.
- Shift once into all selector lever positions while standing
and with engine running.
- Check ATF level using dipstick.
Test requirements:
Vehicle on level ground
n
Hand brake is engaged
n
Selector lever in "P"
n
Engine running at idle.
n
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.ME01.01.5
Page 57 of 83
12/7/2004