Volkswagen Passat 1995 Official Factory Repair Manual page 4257

Work descriptions
Traces of oil and grease
n
Note:
It is essential to replace ribbed belt if malfunctions are
n
found. This will avoid possible break-downs or
operating problems. replacement of a ribbed belt is a
repair measure.
Tensioning ribbed belt:
Note:
With engines with tensioning roller, stretching of
n
ribbed belt is not required, since by a spring-loading
tensioning device correct tension of belt is always
ensured.
- Loosen mounting bolts - 1 - and - 2 - for generator at least
one turn.
- Press down generator at least three times up to stop using
Clamping lever 3297 , in order to ensure optimal freedom of
movement.
- With generator still disconnected, let engine run at idle for
at least 10 seconds.
Note:
Next, note tightening order when tightening bolts for
n
generator. Do not lean on generator and do not touch
ribbed belt.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.ME01.01.5
Page 27 of 83
12/7/2004