Volkswagen Passat 1995 Official Factory Repair Manual page 4233

Work descriptions
- Unclip cover below instrument cluster.
- With ignition switched off, connect Scan Tool (ST) V.A.G
1551/ using Adapter cable V.A.G 1551/3 A .
Interrogating DTC memory:
- Start engine and let run at idle.
- Switch printer on via Print button (indicator lamp in button
lights up).
Indicated on display:
VAG - On Board Diagnostic (OBD) HELP
1- Rapid data transfer*
or
VAG - On Board Diagnostic (OBD) HELP
2- Blink code output*
* is displayed alternately
- Press button - 1 - to select "Rapid data transfer" operating
mode.
Indicated on display:
Rapid data transfer HELP
Enter address word XX
- Press buttons - 0 - and - 0 - for address word "Automatic
test sequence" .
Indicated on display:
Rapid data transfer Q
00 - Automatic test sequence
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.ME01.01.5
Page 3 of 83
12/7/2004